- 27 -
2.
Welding Process When Welding Aluminium
Steps
Content
Description
1
Securely connect the welding torch and earth cable
set to the machine.
2
Ensure the earth clamp is connected near the welding
zone.
3
Select the suitable spool of wire and mount it over the
feeder hub as explained in clause 5.1.
4
Check the brake force tension is sufficient as
explained in clause 5.2.
5
Select the suitable drive roll and tensioner rollers as
explained in clause 6.2. Adjust the pressure as
explained in clause 6.3.
6
Allow approximately 10 to 15mm wire outside the
contact tip and cut the excess.
4
5
10
7
2
1
3
6
