- 12 -
options:
two steps
(without arc closing),
four steps
(with arc closing),
spot
welding
,
special four step
.
11
Voltage adjustment dial:
Turn the dial to adjust voltage output.
12
Inching Wire Feed button:
Press and hold the button to start wire feed,
release the button to stop wire
.
13
SYN button:
Indicator light is lit in SYN state. Pulse welding is forced to use
SYN.
14
Left menu option button:
When this button is tapped, the following
selections are displayed successively and set when the corresponding
selection is lit -
front gas, inductance, burn-back voltage, burn-back
time, rear gas
and other related parameters.
15
Data display screen:
Each function, parameter setting value, actual
parameter value and related information is displayed on the screen.
Wire-feed Display Panel
1
Wire-feed speed display:
The wire-feed speed is displayed in m/min under
the ruling current.
2
Workpiece thickness display:
The reference thickness of the workpiece
that can be welded under the ruling current, is displayed.
3
Current display:
In the static condition, the preset current is displayed and
the actual current is displayed during the welding operation.
4
Left knob:
Click the knob to select between 1. 2 and 3 above and then turn
the knob to set the corresponding parameter. The corresponding parameter
on the main body will be adjusted and displayed automatically.
Press and hold the knob for 3 seconds - the wire feed will start. Press the
knob again and wire feed will stop.
1
2
3
4
5
6
7
