Taurus Indoor Cycle IC50, Assembly And Operating Instructions Manual

Page: 11 / 36

IC50
11
Step 1: Assembly of the front and rear base
Mount the front base (6) on the main frame (1) with the screws M8 x 4“ (3), washers
(4), and nuts (5). Make sure that the transport wheels point outwards. (left illustration).
Mount the rear base (2) on the main frame (1) with the screws (3), washers (4), and
nuts (5) (right illustration).
Using the height levellers (75) on the rear base, you can level out any unevenness
of the floor and give the indoor cycle a safe stability. Turn the height levellers in the
respective direction.
Front Back