Taurus IC70 Smart, Assembly And Operating Instructions Manual

Page: 23 / 48

23
3.2 Button Functions
MODE
+ Press to enter setting of target values
+ Press to confi rm setting
+ Press to lock value function when displayed in scan mode
+ Press and hold for 2 seconds to reset the current setting value to 0
SET
+ Press once to increase setting by one
+ Press and hold for fast increase setting
RESET
+ In MODE or SET, press once to clear current data
+ Press and hold for 2 seconds for a complete reset
LOAD/EMERGENCY
BRAKE
(Knob)
⚠ WARNING
The knob also functions as an emergency brake.
+ Turn to the right to increase the resistance level
+ Turn to the left to decrease the resistance level
+ Press and hold down for a full stop (emergency stop)
Knob
3.3 Emergency Brake
⚠
WARNING
Your equipment has a rigid drive without freewheel. To completely stop the rotation of the
pedals and fl ywheel, the emergency brake must be applied.
The knob, which is centrally located on the main frame, serves as the central control element of the
braking system. The knob allows you to apply the emergency brake in order to bring the pedals and
the fl ywheel to a full stop, but also to adjust the training resistance.
Apply Emergency Brake
To completely stop the rotation of the pedals and the
fl ywheel, press down the knob and keep it pressed until the
pedals and fl ywheel stop moving.
Adjust the Resistance
1. To increase the resistance, turn the knob to the right.
2. To decrease the resistance, turn the knob to the left.