Taurus CUTMASTER, Manual

Page: 11 / 62

English
Meat slicer
Cutmaster
Dear customer,
Many thanks for choosing to purchase a TAURUS
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long pro-
duct life can be assured.
DESCRIPTION
A Thickness control dial
B Blade
C Upper support platform
D Lower support platform
E On/off switch
F Piece holder
SAFETY ADVICE AND WAR-
NINGS
-Read these instructions care-
fully before switching on the
appliance and keep them for fu-
ture reference. Failure to follow
and observe these instructions
could lead to an accident.
-Clean all the parts of the pro-
duct that will be in contact with
food, as indicated in the clea-
ning section, before use.
-This appliance shall not be used
by children. Keep the applian-
ce and its cord out of reach of
children.
-This appliance can be used by
people with reduced physical,
sensory or mental capabili-
ties or lack of experience and
knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.
-This appliance is not a toy.
Children should be supervised
to ensure that they do not play
with the appliance.
-Blade is sharp and could cau-
se harm, be careful and avoid
direct contact with the blade’
cutting edge.
-Pay special attention when
handling the blade, during as-
sembly and disassembly opera-
tions and during cleaning.
-Always switch off the appliance
and disconnect from supply if
it is left unattended and before
changing accessories or ap-
proaching parts that move in
use, assembling, disassembling
and cleaning.
-This appliance must be used
with the support platforms and
the piece holder in position.
-If the connection to the mains
has been damaged, it must be
replaced, take the appliance to
an authorised technical sup-
port service. Do not attempt
to disassemble or repair the
appliance by yourself in order to
avoid a hazard.
-Ensure that the voltage indicated on the rating
label matches the mains voltage before plug-
ging in the appliance.