Taurus CUINA MESTRE, Manual, Page: 4 / 16

Blender 5 3min
Operating positions
Warning!
Do not operate the machine continuously more than
8 minutes at a time.
After one cycle of 8 minutes, the machine should be
cooled down for 30minutes.
Do not use more than one function at same time.
Operate the appliance only when the accessory/tool
is attached according to the below table and is in
the operating position.
Always keep the bowl in the appliance when using it.
No. Picture Attachments
1
2
3
Risk of injury from the rotating tools!
While the appliance is in operation, keep fingers
clear of the mixing bowl. Do not change tools
until the appliance is at a standstill and has been
unplugged. When switching off, the drive continues
running briefly.
How to use the beater attachments:
1. Revolve the knob
clockwise; mean-
while set the arm
to the position as
the picture shows
2. Assemble the bowl
filled with ingredi-
ents into base flute
clockwise.
3. Assembling the
bowl cover into the
arm clockwise.
4. According to your
desire, assemble
beater, balloon
wish or kneading
hook into rotating
axis then revolve
them clockwise (As
picture shows).
5. Press arm down
to the position as
picture shows.
Insert plug in
socket
Set switch to the
appropriate speed