Taurus Comfort Therm UB 81, Instructions Manual

Page: 9 / 60

provided. (Ru 11-1/T3)
-Do not store the appliance if it
is still hot; allow it to cool down
before folding.
-Do not crease the appliance by
placing items on top of it during
storage
-Examine the appliance fre-
quently for signs of wear or
damage. If there are such
signs, if the appliance has been
misused or does not work, take
the appliance to an authorised
technical support service before
switching it on again.
-Do not use the appliance if wet
-If the connection to the mains
has been damaged, it must be
replaced, take the appliance to
an authorised technical sup-
port service. Do not attempt
to disassemble or repair the
appliance by yourself in order to
avoid a hazard.
-When not in use store as ex-
plained in Cleaning.
-Ensure that the voltage indicated on the
nameplate matches the mains voltage before
plugging in the appliance.
-The appliance’s plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
-Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
-If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
-Do not use the appliance near bathtubs,
showers or swimming pools.
-Never use the electric wire to lift up, carry or
unplug the appliance.
-Ensure that the electric cable does not get
trapped or tangled.
-Do not allow the connection cable to come into
contact with the appliance’s hot surfaces.Check
the condition of the electrical connection cable.
DAMAGED OR TANGLED CABLES INCREASE
THE RISK OF ELECTRIC SHOCK.
-Do not touch the plug with wet hands.
-Do not use the appliance if the cable or plug is
damaged.
-If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
-Fully unroll the appliance’s power cable before
each use.
-Do not use the appliance if the on/off switch
does not work.
-Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
-For all night use or continuous use, please set the
switch button to “1. Do not set the switch button to
“2” or “3” for all night use or continuous use.
-Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
INSTRUCTIONS FOR USE
USE:
-Lay the electric blanket flat on the bed. The end
with no control is the foot of the bed.
-Only spread sheets or thin cotton-padded mat-
tress on the blanket.
-Make sure they are laid flat to help conduct
heat and to be able to see whether the electric
blanket is uneven. With everything flat on the
bed the electric blanket can be used safely.
-General temperature adjustment:
-Connect the appliance to the mains before
bedtime.
-Push shift button to “3 “, the power indicator
lamp glows, and the electric blanket will begin
to heat.
-Normally, preheat for 30-50minutes, then the
shift button can be moved to “2” or “1” according
to individual needs so as to keep it at a warmer
temperature when falling asleep, or to “0” to
stop heating completely (the power indicator