Taurus CG3HN/B, Manual

Page: 17 / 88

 Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are compatible.

This product is not connected to a combustion products evacuation device. It should be
installed and connected in accordance with current installation regulations. Particular
attention should be given to the relevant requirements regarding ventilation.
 Before installing, turn OFF the gas and electricity supply to the appliance.

Gas pipe or connector shouldn’t be bent or blocked by any other appliances.
 Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the
kitchen unit.

The panels located above the work surface, directly next to the appliance, must be made of
non-flammable material. Both the stratified surfacing and the glue used to secure it should
be heat resistant, to prevent deterioration.

Turn on appliance tap and light each burner. Check for a clear blue flame without yellow
tipping. If burners show any abnormalities check the following:
-
Burner lid on correctly
-
Flame spreader positioned correctly
-
Burner vertically aligned with injector nipple
 A full operational test and test for possible leakages must be carried out by the fitter after
installation.

The flexible hoses shall be fitted in such a way that it cannot come into contact with a
moveable part of the housing unit and does not pass through any space susceptible of
becoming congested.
SAFETY ACTIONS FOR GAS LEAK

Do not turn on the light.
 Do not switch on/off any electrical appliance and do not touch any electric plug.

Do not use a telephone.
 Stop using the product and close the middle valve.
 Open the window to ventilate.

Contact with service centre by using a phone outside.
INSTALLATION:

Remove all packaging before using the appliance.
 After unpacking the appliance, make sure that product is not damaged and that the
connection cord is in perfect condition. Otherwise, contact the dealer before installing the
appliance.

The adjacent furniture and all materials used in the installation must be able to withstand a
minimum temperature of 85ºC above the ambient temperature of the room it is located in,
whilst in use.
 The gas pipe and electrical cable must be installed in such way that they do not touch any
parts or the appliance.
 The adjustment conditions for this appliance are stated on the label.
 The use of a gas cooking appliance results in a production of heat and moisture in the room
in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation
holes open or install a mechanical ventilation device (extractor hood).
 Prolonged intensive use of the appliance may call for additional ventilation, for example
opening of a window, or more effective ventilation, for example increasing the level of
mechanical ventilation where present.