Taurus Barbell Rack X2, Assembly And Operating Instructions Manual

Page: 13 / 28

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of Main Frame, Front Base Frame and Back Base Frame
1. Attach two foot covers (6) to the front base frame (14).
2. Attach two foot covers (6) to the back base frame (12).
3. Assemble the front base frame (14) to the main frame (10) by using two bolts (1), four washers
(4) and two lock nuts (3).
4. Assemble the back base frame (12) to the main frame (10) by using two bolts (1), four washers
(4) and two lock nuts (3).
5. Now tighten all screws and nuts.
6. Attach the round plug (7) to the plate storage (17).
7. Assemble the plate storage (17) to the back of the main frame (10) by using one bolt (2) and
one washer (4).
8. Repeat all previous steps for the other stand.