Taurus 913600, Manual

Page: 5 / 16

6. After food is ready,
set the control
panel to
“OFF” then unplug.
Turn the knob
clockwise and set
arm up to position
as picture shows
7. Remove beater,
balloon whisk or
kneading hook-
Counter-clockwise.
8. Remove bowl
cover.
9. Remove bowl with
prepared food
counter-clockwise
How to use the meat grinder attachment:
Press the arm down
until you hear a “click”.
Take off the front
protection cover
upwards.
Following their
sequence shown in
the picture, assemble
the worm shaft
blade and cutting
disc into the Cutting
meat canister, then
assemble the
cutting screw bar
into the Cutting meat
canister clockwise.
Following their se-
quence shown in the
picture, assemble the
worm shaft, Conductor
and meatball canister
into the Cutting
meat canister then
assemble the cutting
screw bar into the
Cutting meat canister
clockwise.
* Please remember to
disassemble the cut-
ting cylinder from the
machine, when chang-
ing these accessories.
Following their se-
quence shown in the
picture, assemble the
Worm shaft, Lead
cover and sausage
canister into the cutting
meat canister then
assemble the cutting
screw bar into the
cutting meat canister
clockwise.
Align arrow on the
cutting cylinder to the
other one on arm then
assemble prepared
cutting meat canister
into the arm counter-
clockwise as shown in
picture Fasten the cut-
ting screw bar after the
cutting meat canister is
fixed correctly.