28
MANUFACTURER’S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
TAU S.r.l.
Address:
Via E. Fermi, 43 - 36066 Sandrigo (Vi) - ITALY
Declares
under its sole responsibility, that the product:
electronic control
unit
designed for automatic movement of:
Swing Gates
for use in a:
Residential / Communities
complete with:
Radioreceiver and battery charger board
Model:
D749MA-R
Type:
D749MA-R
Serial number:
see silver label
Commercial name:
Control panel for one-two 24V motors with encoder
Has been produced for incorporation on an access point (
swing gate
) of for assembly with other devices used to move such an ac-
cess point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
Also declares
that this product complies with the essential safety requirements of the following EEC directives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 2014/53/EU Radio equipment and telecommunications terminal equipment
Also declares that
it is not permitted to start up the machine
until the machine in which it is incorporated or of which it will be a
component has been identified with the relative declaration of conformity with the provisions of Directive 2006/42/EC.
The following standards and technical specifications are applied: EN 61000-6-2; EN 61000-6-3; EN 60335-1; ETSI EN 301 489-1 V1.9.2; ETSI EN
301 489-3 V1.6.1; EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information pertinent to the
quasi-machinery.
Sandrigo,
06/06/2017
Legal
Representative
_________________________________________
Loris Virgilio Danieli
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
