Tatuus T318, Technical Manual

Page: 93 / 191

Release 3.00 (22/06/2020)
Page 92
5.4 D
AMPERS
The standard damper is the KONI 2812, full open length is 320mm and maximum stroke is 44mm.
Rotating the adjustment discs, located in the window of the top eye, adjust the damping. You only need a
steel pin adjustment tool of 1.5mm diameter. The adjusters are marked with letters that are visible on the
alloy top eye, with
a ‘B’ for bump and an ‘R’ for rebound next to the corresponding disc.
The bump and rebound discs are also recognizable at their color. The bump disc is colored black and the
rebound discs is colored red. Rotate the discs according to the markings on the top eye.
The adjusters have 8 distinct stops (clicks), each of which marks an adjustment position.
There is a total of 8 adjustment positions from minimum to maximum adjustment.
The minimum position is referred to as position 1 and the maximum adjustment position as position 8.
The adjusters have a positive stop at the minimum and maximum position.
Never use excessive force while adjusting.
Front reference: 2812 030 769
Front valving:
Bump cartridge: 71 60 21 967 0
Rebound cartridge: 71 60 22 938 0
Mainvalve: 71 60 25 974 0
Pgas: 15 bar
Rear reference: 2812 030 932
Rear valving:
Bump cartridge: 71 60 21 932 0
Rebound cartridge: 71 60 22 932 0
Mainvalve: 71 60 25 140 0
Pgas: 15 bar