Tatuus T318, Technical Manual

Page: 12 / 191

Release 3.00 (22/06/2020)
Page 11
1.3 G
ENERAL
A
GREEMENT AND
W
ARRANTY
Tatuus is proud of the quality, success and reputation of their products and is delighted that you have chosen
to use the T318 chassis.
The design of each chassis is the subject of much research and development, technical analysis and detailed
testing. However, as with all motorsport products, it is vital that they are correctly maintained and adjusted
for each individual circumstance. This manual is intended to ensure that you obtain the maximum perfor-
mance and reliability from this chassis.
We would stress that after each event or prolonged period of running (suggested to be 5
’ 000km) the chassis
should be carefully inspected and stripped as appropriate.
This manual contains mileage recommendations for critical components detailed in section 1.6. If in doubt
please contact our Commercial Department who will advise you or, if necessary, put you in contact with one
of our engineers.
It is important to ensure that all adjustments and tolerances are as specified. The use of parts not supplied
by Tatuus will automatically invalidate any warranty or other liability which would normally be assumed by
Tatuus.
Your attention is drawn in particular to the following statement:
‘Goods intended for motorsport or any related application, or for product development, evaluation or exper-
imentation are supplied subject to the Customer recognizing that such goods may operate under extreme
loads and conditions and that it is the
Customer’s responsibilit y to ensure that the goods are correctly in-
spected, adjusted and maintained at all times to suit t he specific conditions in which they may be used.’
‘Lightweight and weight optimized components are supplied subject to warranty only against manufacturing
defects. It is possible that in certain conditions operating life may be reduced. Similarly, prototype, experi-
mental or components manufactured to the
Customer’s design are supplied subject to warranty only against
manufacturing defects.
Furthermore, such components, by their very nature, are not warranted as to their suitability for use or per-
formance
.’
‘ Tatuus shall have no liability to the Customer (other than liability for death or personal injury resulting from
Tatuus’ negligence) for any loss or damage of any nature arising from any breach of any expressed or implied
warranty, term or condition of the contract or from any negligence or breach of statutory or other duty on
the part of Tatuus in connection with the performance or purported performance of or failure to perform
the contract other than as set out in this Condition. In no circumstances shall Tatuus be liable for any claims
for indirect or consequential injury or damage (including loss of
profits) arising from any such matters.’