Tatung V32FCBB, Service Manual

Page: 19 / 57

-16-
CODE SYMPTOM COUNTERMEASURES
RC1 Remote Control does not
work z Make sure the batteries in remote control are not flat
z Check the polarity of the batteries
z Use the remote control in the front of the TV or from
less than seven meters away.
z make sure the Remote Sensor Window is not under
strong lighting.
R
em
ot
e
C
on
tr
ol
RC2 Can not change channels
with the remote control z Press TV button to switch to TV mode.
PH1
Picture suddenly Stops
Responding or
abnormal .
z
Press RESET button on remote control .
z
Unplug and then plug the Power Cord of the TV from
the AC outlet.
Pictur
e Halt
/ Abnorm
al
NG1
Issues can’t be solved. z If the picture still abnormal, execute “ Clear
EEPROM ”.
STEPS :
1. Press POWER Button to turn on LCD-TV.
2. Use right hand to press Ch
▽ and
Ch
△ buttons
simultaneously, and keep pressing them (do not
release).
Use left hand to turn the Main Power
Switch to
OFF
and then
ON
.
3. When UPDATE EEPROM appears on the screen,
release Ch
▽
and Ch
△
buttons, which you’re
pressing.
Note : Remind user that every setting will return to
factory preset mode including PIN of parental
control (PIN : 000000), channel setting.
No
te
1.
CV and PC modes, including D-sub and DVI, are not available on Sub-display of PIP and
PoP.
2. TV mode is note available on side by side display.
3. If Main-display is CV and Sub-display is ON, de-interlace function is not available for CV.
-17-