Tatung V17AFTW, Service Manual

Page: 4 / 72

5) An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
6) Ventilation-The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since
insufficient ventilation can cause overheating and/or shorten the life of
the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation opening. This product is not
designed for built-in installation, do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
1.2 Product Safety Notice
1) Many electrical and mechanical parts in this chassis provide special
visual safety protection. The protection afforded by them cannot
necessarily be obtained by using replacement components rated for
higher voltage, wattage, etc.
2) Before replacing any of these components, read the parts list manual
carefully. The use of substitute replacement parts, which do not have the
same safety characteristics, as specified in the parts list may create shock,
fire or other hazards.
1.3 Service Notes
1) When replacing parts or circuit boards, wrap the wires around terminals
before soldering.
2) Keep wires away from high temperature components.
3) Keep cable and their shielding in their original position so as to reduce
interference.