Tatung TME50 User Manual Download Page 12

11

Basic Operations

USB multimedia function

Connect the USB storage device to the USB interface in the 

 set, press "

SOURCE

" key to select the 

USB signal source and press "

OK

" key to confirm.

Monitor

 

Remark

:

1. Compatible USB media files: video, audio, picture, and text. The nonstandard USB storage devices may be 
    incompatible; please replace with standard devices;
2. Stream media system has limitation on every kind of file format, and will report error if beyond system limit;
3. Do not unplug the USB device while playing, or else it will cause system or device error;
4. The system supports USB flash drive and removable hard disk with standard USB1.1 and USB2.0 interface 
    transmission protocol. The file format of USB device must be FAT or FAT32, instead of NTFS.
5. The USB interface of this Monitor set can supply a voltage of 5V and the maximum current is 500mA; accurate 
    identification of the multimedia player will be affected 
    when a storage device above 500mA is used, which is 
    a normal phenomenon.

Press "

" key to select file type menu, which includes 

PHOTO, MUSIC, MOVIE and TEXT.

PHOTO

Select       to enter the menu, select a disk, and press 
"

OK

" key to read the files.

/

USB 2.0

PHOTO

MUSIC

MOVIE

TEXT

▲▼

Select     to return to disk selection interface. Press "

" key to select photo, and press "

OK

" key to 

confirm (the selected file has a red check mark in the lower right; you can select multiple files and add to the 
playing list), and then press "

PLAY

" key to play the files. If you press "

PLAY

" key directly without selecting any 

file, the system will add all the files in the folder to the playing list. 

Basic functions

While playing, press "

INFO

" key to show the basic operation function bar in the bottom of the screen (press "

key to hide the function bar).

/

/

/

Play/Pause

: Press "

" key to select this function, and press "

OK

" key to play or pause.

Previous

: Press "

" key to select this function, and press "

OK

" key to play previous picture.

Next

: Press "

"  key to select this function, and press "

OK

" key to play next picture.

Stop

: Press "

" key to select this function, and press "

OK

" key to stop playing and return to 

previous menu.

Repeat

: Press "

" key to select this function, and press "

OK

" key to select repeat one or repeat all 

or not repeat.

 

 

 

 

 

/

/

/

/

/

Background music

: Press "

" key to select this function, and press "

OK

" key to play the 

background music (music files and picture files should be saved in the same folder, or select music 

files in the music folder first).

Playing list

: Press "

" key to select this function, and press "

OK

" key to show the playing list.

File info

: Press "

" key to select this function, and press "

OK

" key to show the picture info, 

including resolution, size, etc.

 

 

 

/

/

/

Summary of Contents for TME50
















Reviews: