
9
Turning on/Standby
Insert the power plug into the outlet. Press " " button on the
set, and press " " key on the remote
control or on the control panel to turn on the
set. Press " " key again to switch the
set to
standby state.
★
Special note
This device adopts energy saving technology:
1. If there is no signal input in power on state, the
set enters standby state automatically after five
minutes.
2. When the schedule power off time is reached, the
set enters standby state automatically.
Signal source selection
Press ''
SOURCE
'' key either on the remote control or on the control panel. The menu of
''Input Source'' will be displayed on the screen. Then press "
▲
/
▼
" key on remote control
or "
UP/DOWN
" key on the control panel to choose the signal source. Press ''
OK
'' key on
the remote control or ''
MENU
" key on the control panel and
will switch the current
signal source to the signal source you choose.
Menu operation description
Press '
'MENU
'' key on the remote control or on the control panel,
then the Monitor will display the main menu.
1. Press "
/
" key on the remote control or ''
VOL+
/
VOL-
'' key on
the control panel to select the adjustment sort menu, which
includes: PICTURE, SOUND, OSD.
2. Press "
▼
" key on the remote control or ''
DOWN
'' key on the
control panel to enter the adjustment sort menu.
3. Press "
▲
/
▼
" key on the remote control or ''
UP/DOWN
'' key on
the control panel to select what is needed to adjust in sort menu.
"
/
"
5. When the main menu appears on the screen, press "
MENU
" key to exit; when submenu appears on the
screen, press "
MENU
" key to return to previous menu; press "
SOURCE
" key to show the signal source
selection menu, and press it again to exit from the menu.
6. In the process of menu operation, the unavailable options in current state will be in gray.
7. The menu operation in this manual uses the example in
state; the operations in other state are same
as the Monitor state.
"
", "
", "
"
"
"key
Monitor
Monitor
Monitor
Monitor
Monitor
Monitor
4. Press
key on the remote control or ''
VOL+
/
VOL-
'' key on
The control panel to adjust the value or setting.
Monitor
Note
:
▲ and ▼
in this Manual stand for the direction cursor keys on the remote control
unless specifically defined. The operating instructions in the text below are all based on keys on the remote
control. Please understand the keys on the panel by yourself.
Input Source
AV1
AV2
YPbPr
PC
HDMI1
HDMI2
USB1
USB2
Adjust
Select
Menu:Exit
Full
Standard
48
48
50
55
50
Picture Mode
Contrast
Brightness
Saturation
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Hue
Soft
Off
Basic Operations