3
●
Do not let children climb onto the
set.
● Keep the small accessories away from children's reach to avoid swallowing.
● If the
set won't be used for a long time, please turn off the device and unplug the power cord.
● Before cleaning the
set, unplug the power cord and wipe with soft cloth; do not use chemical
reagents and avoid foreign substances entering into the device. Improper cleaning may damage
the appearance or erase the printing information on the product.
● To adjust the position or angle of the
set, please disconnect all wires and move slowly to
avoid falling off.
● Do not rub with hard object, knock at, bend or squeeze the screen.
● Do not use machine immediately after transfering machine to the places with high temperature
from low temperature, which will cause fogging inside machine and failures.
● If the screen is broken and the liquid splashes on skin, please wash with clean water immediately
for 15 minutes, and go to see your doctor.
● To carry the
set with hands, please grasp the corners and hold the bottom; do not apply force
on the panel.
●
Displaying the same image for a long time or active image with fixed words, icons will leave
"image persistence" on screen which will not disappear after powering off for a long time. This
undesirable phenomenon is not covered by warranty.
● Healthy
watching:
1. Watch in appropriate light; poor light or long time watching may hurt your eyes.
2. If a headset is used, adjust the volume appropriate to avoid hurting your hearing.
● Unplug the power cord of the device to cut off the power supply.
● If a power plug or appliance coupler is used as disconnecting device, it should ensure easy
operation.
● Power plug shall be connected reliably. Loose power plugs may cause sparkle and fire.
● All the technical specifications in the user manual and on the packaging are subject to changes
without prior notice. If there is slight deviation between the user manual and actual operation,
the latter shall prevail.
Monitor
Monitor
Monitor
Monitor
Monitor
Monitor
Attention
1. The
set; 2. User Manual; 3: Remote control; 4: Power cord (or attached to
set)
Mounting the
set
Insert the base into the support hole in the rear enclosure in the arrow direction shown in the picture, aligning
the screw hole in the rear enclosure and the screw hole in the base, and then tighten the screw.
Remark
: The actual base and appearance may be different from the picture; please refer to the device.
Monitor
Monitor
Monitor
Packing list
Safety warning and notice
Mounting and Connecting