Tatung TME42 User Manual Download Page 10

9

Basic Operations

    The control panel to adjust the value or setting.

Monitor

Monitor

Note

▲ and  ▼ 

in this Manual stand for the direction cursor keys on the remote control 

unless specifically defined. The operating instructions in the text below are all based on keys on the remote 
control. Please understand the keys on the panel by yourself.

5. When the main menu appears on the screen, press "

MENU

" key to exit; when submenu appears on the 

    screen, press "

MENU

" key to return to previous menu; press "

SOURCE

" key to show the signal source 

    selection menu, and press it again to exit from the menu.
6. In the process of menu operation, the unavailable options in current state will be in gray.
7. The menu operation in this manual uses the example in 

 state; the operations in other state are same 

    as the 

 state.

 "

", " 

", "

"

"key 

PICTURE

Adjust the overall effect of images: Standard, Soft, User, Bright.

Adjust the overall layering of images: increase the analog value to improve the 

contrast and decrease the analog value to reduce the contrast (0-100).

Adjust the overall brightness of images: increase the analog value to improve the 

brightness and decrease the analog value to reduce the brightness (0-100).

Adjust the color depth of images: increase the analog value to improve the depth and 

decrease the analog value to reduce the depth (0-100).

Adjust the hue of images: increase analog value to increases green and decrease 

analog value to increases purple(0-100).

Adjust the sharpness of images: increase the analog value to increases the definition 

and decrease the analog value to reduce the definition (0-100).

Adjust the aspect ratio: Full, 4:3, Subtitle, Film.

Contrast

Brightness

Saturation

Hue

Sharpness

Aspect Ratio

Picture Mode

Refer to the table below for the specific menu settings.

Menu setting list

SOUND

OSD

Adjust the overall color temperature of images: Standard, Warm, Cool.

Set the grade of noise reduction: Middle, High, Off, Low.

Select the audio mode: Standard, Music, Movie, User.

Adjust the treble: increase the analog value to increase the treble and decrease the 

analog value to reduce the treble (0-100).

Adjust the bass: increase the analog value to increase the bass and decrease the 

analog value to reduce the bass (0-100).

Adjust balance degree of right&left sound track: move the analog value to left to 

increase the left volume; move the analog value to right to increase the right volume

(L50-R50). Generally, the balance is set to 0.

Set the menu language: There are many languages to select.

Adjust duration of OSD menu: 15, 30, 45, 60. Unit: second.

Adjust the menu transparency: increase the analog value to increase the transparency 

and decrease the analog value to reduce the transparency (0-100).

Set up whether screen turns to blue when there is no signal: On and Off.

Set the waiting time of standby: Off, 15M, 30M, 45M, 60M,90M, 120M, 240M. unit: min.

Restore factory settings.

Noise Reduction

Remark

: The values of 

 adjusted by the user will be 

saved automatically.

Sound Mode

Treble

Bass

Balance

Remark

: The values of treble and bass adjusted by the user will be saved automatically.

Color Temp.

Contrast, Brightness, Hue, Saturation and Sharpness

OSD Language

OSD Duration

 

OSDTransparency

Blue Screen

Sleep Time

Recall

Note: 

With the mode of 

all functions and adjustments are similar with Monitor. User 

can check it at convenience. 

AV, YPbPr, PC, HDMI, 

HDMI connector can realize DVI connector function with external HDMI/DVI 

commutator.

Summary of Contents for TME42















Reviews: