Disassembly Instructions
Caution : When servicing or replacing the CRT Disconnect the
1. Face Down The Monitor ( Fig 4-1) . Anode and Discharge the Anode shield completely.
2. Back Cover Removal As high voltage (26KV) may remain on the Anode
a) Remover 4 screws ( A ) from the for an extended time after power off .
back cover (Fig 4-2) (Fig 4-3). a) Unplug two grounding connectors and the degaussing coil
b) Remove the back cover (Fig4-4 ). grounding connector from the CRT drive shield .
b
) Remove CRT drive board from CRT neck ( Fig4-5 ).
3. PCB Assembly Remove c) Unplug the DY connector , AC connector , Degaussing coil
connector and the CRT grounding connector from the FBT
shield .
(Fig. 4-1 ) (Fig. 4-2 )
( Fig. 4-3 ) ( Fig. 4-4
monitor-man-uk
)
d) Unplug , microphone , connector .
e) Discharge the remaining static electricity by
shorting CRT anode to ground. Then remove
the FBT anode connector .
f) Remove the PC main board (G) form Z sliders (H)
of the front cover. (Fig4-6)
