22
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
PT / PTL
Maintenance
When the rear scraper is equipped with gauge wheel, it is necessary to lubricate the
grease fittings every 50 hours of service.
Lubrication
To reduce the wear caused by the friction between the moving parts of the equipment,
it is necessary to carry out a proper lubrication, as indicated below.
• Be sure about the lubricant quality, with relation to its efficiency and purity, avoiding
the use of products contaminated by water, dirt and others.
• Clean the grease fittings with a cloth before inserting lubricant and replace the
damaged ones.
• Insert an enough amount of new grease.
• Use medium consistency grease.
Lubrication points
