13
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GLHAL
Assembly
Disc gangs assembly
IMPORTANT
Check the correct side of the bearings and spacer spools according
to the concavity of the disc blades.
• Place the external lock (A) along with the axis (B). (Figure on page 14).
• Place the disc blades (C), bearings (D) and spacer spools (E), following the
instructions on page 12.
• Fit the internal lock (F), the lock nut (G) and the nuts (H) passing 5 mm from the
axis face.
• Now, use the wrench (A) from page 11 and tight the gangs to get maximum torque.
• To tighten, the gangs must remain underpinned with a piece of wood or another
object, preventing it from moving. (Figure on page 14).
