Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
26
DCA² MC 2500, 5500, 7500 & 10500
Hitching to the tractor (hydraulic motor)
Approach the tractor and couple the
hoses (A) to the quick couplers. To do so,
shut down the engine, relieve the control
valve pressure by activating the lever
a couple of times and check if the quick
couplers are clean.
Check the drawbar type from your tractor. To hitch the equipment, use the tractor
drawbar;
Use the jack on the drawbar to lift or lower the hitch so it is possible to align it with the
tractor drawbar;
The tractor drawbar must always remain fixed and centered.
Set-up instructions
Tractor
Tractor
PTO
PTO
A
A
WARNING • When setting up the equipment for the job, the tractor-equipment must
be leveled related to the soil. Besides that, the tractor must be hitched
to the equipment hitch to avoid unnecessary efforts during the set-up.
• When hitching the equipment to the tractor, use a chain to lock the
equipment drawbar to the tractor hitch bar. This measure will prevent a
possible rupture of any hydraulic hose or breaks on the hitching system,
what would make the equipment tilt up.
• The correct way to hitch the safety chain (C) is the same for an equipment
with hydraulic motor or cardan, but may vary according to the tractor
model. However, the hitch and the hoop must pass through the chain
links as shown on the illustration from the next page. Never hitch the
hook without passing it through the chain.
Hitching to the tractor
Summary of Contents for DCA2 MC 2500
Page 68: ...www marchesan com br...
