:
www.tatteredlace.co.uk
FABRIC CUTTING SETTINGS:
MATERIAL
SETTINGS
NOTES
Applique Dies w/ adhesive liner
3-4
Die is purple in colour - Single cuts.
Fabric Deep Dish w/ adhesive liner
3-4
Up to 3 layers.
Fold & Cut Deep Dish Dies
5
Up to 2 layers with adhesive.
Single Die cuts Applique Deep Dish
Dies w/ liner
5-6
Die is silver in colour.
Geometric Deep Dish Dies
5-6
Up to 6 layers no adhesive.
Odd Shapes Deep Dish Dies
6
3-5 layers no adhesive.
Thick Wool Felt
8
No adhesive.
Go Fabric Dies
9
Die is the base then fabric, adapter
plate, top clear plate.
SPECIAL INSTRUCTIONS:
Adjust your setting to 0-4 on the pressure scale. Turn the handle. If the platform has no
resistance in turning, move the thumbwheel toward you (+ for more pressure). If the
handle does not turn without significant pressure, the platform is too tight and you will
need to turn the thumbwheel away from you slightly. As you become more used to the
Crossover™ you will recognise when you have the right pressure for the particular type of
die you are using.
For detailed dies, we recommend the stainless steel metal adaptor. You may place the
adaptor plate under the die so that you can still see the cutting activity without taking the
platform assembly apart. Pass the platform through and then back. Observe the die cutting
success. If the die cut is not complete, back the platform out, adjust the thumbwheel and
then pass the platform through again.
PAPER CRAFTING
INSTRUCTIONS
