TATA Motors NEXON EV, Owner'S Manual

Page: 159 / 232

are not processed by the system.
If object is made/covered by foam or •
sponge or snow where ultrasonic
sound signals are absorbed.
Objects close to the rear bumper can •
go undetected by the Reverse Park
Assist field of detection. Driver should
use extreme caution while parking the
vehicle.
If height of the bumper is changed due •
to alteration to the suspension or other
causes
If the sensor areas are extremely hot •
from direct sunlight or cold due to
freezing weather.
If sensors are covered by a hand, •
sticker, accessory, etc.
If ultrasonic noise is present around •
Vehicle due to other vehicle sensors,
horn, motor, air braking system (large
vehicles), Exhaust Fans, Wireless
transmitters or mobile phones
If the vehicle speed exceeds 10 kmph, •
the system will not warn you even
though objects are detected, error
message ‘Vehicle Speed is high, drive
slowly!’ will appear.
Driving on uneven road surfaces e.g. •
Gravel, unpaved roads, Artificial Speed
Breakers, or gradient.
Poles of square/rectangular cross sec- •
tion might not be detected due to the
ultrasonic technology limitation.
Reverse Park Assist System Preven-
tive Maintenance
Regularly clean the Sensors/camera* 1.
(*if equipped) and keep them free from
dust, ice, mud, water, chewing gum
etc. for proper working of the system.
Use a smooth cloth for cleaning.
Do not use water at high pressure for 2.
cleaning the sensor or camera.
Do not cover the Sensors/camera* (*if 3.
equipped) surface with any additional
fitment. This will interrupt park assist
performance.
Do not remove mud, snow on the sen- 4.
sors using stick or hard material. Use
normal water and soft cloth.
General Warnings
In low light conditions, the screen may 1.
darken or image may appear faint.
If the tire sizes are changed, the posi- 2.
tion of the fixed guidelines dis-played
on the screen may change.
In case of damage of the rear portion 3.
of the vehicle, Reverse Park Assist
sensors position may change which
causes wrong visual information on
display. In case of dam-age make sure
that Reverse Park Assist sensors are
fitted properly at the intended location.
In case of uneven road conditions or 4.
WARNING
Due to any reason, if the sensor gets
misaligned or loses its intended fitment
position, contact your dealer for refit-
ment.
NOTE
Turning the ignition ‘OFF’ ‘while the
Park assist feature in running would dis-
able the feature.
STARTING AND DRIVING
151