21
9.2 Transferring files to PC
Use the USB cable to connect the camera on your computer, the camera
will turn on automatically, then enter into storage mode, that is to say,your camera
now is used as an external storage device. Alternatively you can remove the Micro
SD card and use a card reader (not included) to achieve the same result.
1.Select the file(s) you want to transfer to your computer by highlighting them.
2.Either drag the files to the desired place on your computer (this will make a copy
of the file on your computer) OR right-click the file, select “Copy” and right-click in
the desired place in your computer and select “Paste”.
Note: You can also transfer entire folders of pictures / videos to your computer.
9.3 Using the external MIC (optional)
Insert the external MIC to Micro HDMI port, the camera will automatically switch
to record the sound from the external MIC.
This will help to reduce the noise and get better video sound.
Cautions
Do not drop the camera.
Do not place heavy objects on the camera.
Keep the camera away from water and liquids (unless equipped with
waterproofcase). This may cause the camera to malfunction.
Recharge the battery via the USB cable.
The camera should not be in heat over 55
℃
.
Do not use the camera when it is low power.
Do not use the camera while it is in charging.
Do not attempt to open the case of the camera or modify it in any way. If the
camera has been detached, the warranty will be void. Maintenance and repairs
can only be performed by TAT.
