14
SERVICING
Your gas barbecue should be serviced annually by a competent registered person and an annual gas
safety certificate should be issued starting one year from date of purchase.
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Burners will not light using
the ignition system
1. LP gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or gas hose
5. Electrode wire loose or disconnected
on electrode or ignition unit
6. Electrode or wire is damaged faulty
pushbutton igniter
1. Replace with full cylinder
2. Have regulator checked
or replace
3. Clean burner
4. Clean jets and gas hose
5. Reconnect wire
6. Change electrode and
wire change igniter
Burner will not light with a
match
1. LG gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or gas hose
1. Replace with full cylinder
2. Have regulator checked
or replace
3. Clean burner
4. Clean jets and gas hose
Low flame or flashback (fire
in burner tube-a hissing or
roaring noise may be heard)
1. LP gas cylinder too small
2. Obstructions in burner
3. Obstructions in gas jets or gas hose
4. Windy conditions
1. Use larger cylinder
2. Clean burner
3. Clean jets and gas hose
4. Use BBQ in a more
sheltered position
Battery insert:
Take out the ignition button,
inserting 1 pc of AA battery
IMPORTANT POINTS
Upon receipt, your oven will be covered in a thin layer of oil which is used in the manufacturing process,
this needs removing prior to first use with either hot soapy water or a remover such as white spirit. If you
don’t remove this prior to getting the oven hot on the first occasion, the burnt oil will tarnish the metal,
especially on the inside.
Avoid rubbing the pr
inted ‘HOT’ areas on the oven with thinners or similar agents as they may damage the
printing.
Due to the heating and cooling of the oven and vibrations caused by the spit rotations, some of the
screws may become loose during transit or use. PLEASE tighten the screws periodically in
particular the 4 screws on the motor MUST be checked every time you cook as these are mounted
upside down they are particularly venerable to becoming slack and a motor falling off could cause
issues during the cooking process.
