3
Fit the base support to the back back panel
Fit corner supports and the front panel to assembled section
- Turn the assembled unit over being careful to keep the base in position
- Insert the base support into the back panel aligning the dowel and the locking pin
- Tighten the cam lock with a screwdriver to lock the base support in place
The corner support needs to be in positon in the side panel before the front panel can be attached.
- Stand assembled section upright
- Insert left hand side corner support to side panel of the assembled section and hold in position
- Place front panel on top of assembled section while continuing to hold corner support in posi-
tion, aligning the locking pins, with cam locks and dowel with hole
- When front panel is in position tighten left hand side cam locks.
- Repeat for the right hand side
Fit Castors
-Turn the assembled tidy drawer over.
-Fit x 5 castors, firmly pushing into castor inserts
TM
Turn the tidy drawer over and it is complete and ready to use.
Use a screwdriver to tighten the
cam locks
5
6
7
