Page 14 of 25
INITIAL FIRING
When lit for the first time, the appliance may emit an odor resulting from evaporation of paint and
lubricants used in the manufacturing process. This is normal and will subside after the unit has run
for an hour or so.
MANIFOLD PRESSURE REGULATOR ADJUSTMENT
The manifold pressure regulator controls gas input and flame height, and is pre-adjusted at the
factory. No further adjustment is required.
PRIMARY AIR ADJUSTMENT
Aeration is factory set but may need adjustment for altitude or movement during shipping. To adjust
the air shutter loosen the screw on the bottom of the valve tray and slide the shutter bolt right or left to
suit. Sliding the lever to the right closes the air shutter making the flame taller and more colorful,
sliding the lever to the left opens the air shutter this brings down the flame height and reduces flame
color.
Caution: Parts requiring adjustment during operation may be hot.
Note: Burner and bottom of firebox only shown for illustration purposes.
Figure 8
f i r e - p a r t s . c o m
