Taski swingo 455B, Technical Manual

Page: 66 / 103

GTS Technical Manual
5. March 2013 Edition: V1.10/2013 5-45
Copyright © 2013, Diversey Inc.
05
.66
.10
b
ru
sh
d
riv
e
- b
rus
h
dr
iv
e u
ni
t -
45
5B_
75
5B e
co_
75
5B p
ower_
855B p
ower_
V1.
00.
fm
5.9 Brush drive
5.9.1 Removing of brush drive unit
Picture 68: Brush drive removing
• Unscrew brush housing fixation screws (455B:08/137, 755B:08/
137).
• Remove the brush housing from the brush drive unit.
• Disconnect the fresh water hose from the brush drive unit.
• Disconnect the brush motor wires from the connection block.
• Remove self locking nuts (455B:06/124, 755B:07/124) on the
LH and RH side from the cradles.
• Remove self locking nut (455B:06/119, 755B:07/119) at
eccentric disc (455B:06/120, 755B:07/120).
Picture 69: Brush drive removing detail
• Remove the eccentric disc.
• Remove the bolt (455B:06/111, 755B:07/111) and eccentric
shaft (455B:06/110, 755B:07/110).
Make sure that you hold the brush drive unit firmly.
• Pivot the complete brush drive unit out.