Taski swingo 455B Technical Manual Download Page 30

Page: 30 / 103

GTS

Technical Manual

5. March 2013

Edition: V1.10/2013

5-9

.10

.24

dle -

ker

- 4

55B_

V1.

00.

5.1

Handle

5.1.7

Removing of toothrocker

Picture 9: Toothrocker

Remarks

For a easier access to the toothrocker, disconnect the bowden cable

at the lever.

•

Remove handle cover according to chapter REMOVING OF

HANDLE COVER AND ELECTRONICS.

•

Remove the eccentric shaft together with the end bolt of the

bowden cable according to chapter REMOVING OF HANDLE

ADJUSTMENT LEVER.

•

Disconnect the two flexible hoses (02/106,132) from the tank

cover (02/101).

•

Remove the tank cover from the recovery tank.

•

Remove the 6 screws (01/150) from the cover disc (01/149).

•

Pull out the complete handle from the fresh water tank (02/117).

Summary of Contents for swingo 455B





























































































Search results

Summary of Contents for swingo 455B

Reviews:

Related manuals for swingo 455B

Brands by name

Popular brands

Taski swingo 455B, Technical Manual

Search results

Summary of Contents for swingo 455B

Reviews:

Related manuals for swingo 455B

Brands by name

Popular brands