65
Beginning work with the machine
Cleaning start
Setting the brush pressure
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in sev
-
eral work steps.
Replenishing cleaning solvent
Attention:
Always wear slip-resistant shoes and ap
-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Plug the power supply cord into the mains socket.
• Switch on the machine (key switch).
Switch lights up
• Hold the machine firmly by the han
-
dle and bring it into the working posi
-
tion (2) by pressing the red footpedal
(1).
The electrical brushes switch on.
• Press the suction switch (1) to switch
on the suction unit (no lamp).
• Press the water pump switch (2) to
switch the water pump on
Switch lights up
Attention:
If the red brush pressure control lamp
lights up, correct the brush height as de
-
scribed below.
• Adjust the brush height (brush pres
-
sure) by turning the regulator until the
green display lights up.
LED display
Status indicator
Display green
Brush height (brush pressure) correctly
set.
Display red
Correct the brush height (brush pres
-
sure). Turn the setting knob to the right for
more, and to the left for less brush pres
-
sure.
1
2
1
2
MAX
BRUSH PRESSURE
MIN
Notice:
More precise details regarding the direct
and indirect working method can be found
on the respective method sheet.
Please contact your TASKI customer con
-
sultant for further details.
Attention:
The flooring may be damaged when work
-
ing without cleaning solution.
Notice:
A rattling sound of the pump indicates that
the fresh water tank is empty.
Attention:
The pump must never run dry for an ex
-
tended period.
• The machine must be switched off.
• Open the tank lid.
• Fill the fresh water tank with water, see page 64.
• Add the cleaning product using the dosing cup.
• Close the tank lid.
EN
