Taski procarpet 30, Instructions Of Use

Page: 74 / 369

72
1 Handle bar
2 Suction nozzle
3 Triangular handle for unlocking the brush holder
4 Lid for brush housing and brush holder
5 Cylindrical brush
6 Centering hexagon for brush
7 Fresh water tank filter
8 Foot pedal in parking position (suction nozzle and
cylindrical brush lifted up)
9 Supporting roller
10 Foot pedal in working position (suction nozzle and
cylindrical brush lowered)
11 Additional drain hose for fresh water tank (hand tool
optional)
12 Plug-in coupling (additional drain hose and hand
tool)
13 Transport wheels
14 Drain hose fresh water tank (blue cover)
15 Suction hose recovery tank
16 Drain hose of recovery tank
17 Suction hose fresh water tank
18 Cable guide
19 Power supply cord
20 Main switch (ON/OFF)
21 Function switch (I = encapsulation, 0 = brush only,
II = spray extraction)
22 Explanation of function
23 Cord support
24 Recovery tank
25 Fresh water tank
26 Lid recovery tank
27 Suction filter
28 Float
29 Adjustment of brush height
30 Lid fresh water tank
31 Filling level indicator
32 Operating lever brush motor (ON/OFF)
Prior to commissioning
Mounting cylindrical brush
Before inserting, please ensure
• that the brush is not located below the red/yellow marking
and that bristles are not shorter than 1.4 cm.
Attention:
Do not use brushes that have reached
their wear limit. Use original TASKI brush
-
es only.
Failure to observe these instructions may
result in inadequate cleaning results or
even floor damage.
1
2
4
3