15
I25
I24
I23
I22
I21
I20
I19
I18
I17
I16
I15
tr
sl
p
t
p
l
n
o
n
l
it
fr
fi
es
en
d
e
d
a
cz
EU Declaration of Conformity
We
JohnsonDiversey Switzerland
CH-9542 Münchwilen
hereby declare that the product described below both in this basic design and
construction and in the version marketed by us conforms to the relevant safety-
and health-related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Machine Directive (73/23/EEC) in version
EEC EMC (Electro Magnetic Compatibility) (89/336/EEC) in version 98/13/EEC
Harmonised standards applied:
EN 55014-1/EN 55014-1-A1/EN 55014-1-A2/EN 55014-2/EN 55014-2-A1/
EN 61000-3-2/EN 61000-3-2-A2/EN 61000-3-3/EN 61000-3-3-A1/
It is ensured through internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
Tank cap / Dosing cup
2
Outlet opening / Filter
3
Tube with quick coupler
4
Power supply cord
5
Bolt locking attachment
6
Dosing control unit (on / off switch and foam quantity control unit)
7
Sinter head (air and shampoo solution are mixed creating foam)
Preparation for operation/Operation
Recommended chemicals
Only use chemical products recommended by the manufacturer.
Dosage:
Dosing examples (dosing according to product information):
Product:
Foam generator
Name:
FG 2
Model:
FG 2 (230-240V~/50-60Hz/120W)
Dipl. Ing. (FH) D.Windmeisser
Dipl. Ing. (FH) P. König
2
1
4
3
5
6
7
5,5L
0
4
3
2
1
The guide pillar of the ergodisc must be in the upright position
before the apparatus is mounted.
• Pull the power supply cord of the single disk machine out of the mains
socket.
• Mount the apparatus onto the ergodisc and
fasten it using the bolt locking attachment.
• Plug the power supply cord of the apparatus into the socket of the ergodisc,
situated at the back of the handle.
• Place the end of the tube into the quick coupler
by pulling back its outer ring of the quick
coupling and then releasing it again.
Now the tube is fixed.
• Insert the hose over the nipple of the central
water and spray inlet of the single-disk machine.
Caution:
The use of other products (e.g. containing chlorine) can damage
or destroy the machine.
• Unscrew the tank cap / dosing cup.
• Fill water into the tank.
Caution:
Maximum permissible water temperature 60 °C/140 °F.
• Pour the measured product from the dosing cup
into the tank.
1½
5x
3%
10%
TASKI TR 101
5,5L
5,5L
5,5L
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
