background image

To Remove the battery

1. Press in and hold the latch buttons       on both sides
    of the battery pack. 

(1)

2. Grasp the trigger handle 

(2)

firmly. Pull the battery pack

out of the handle.

NOTE:

The battery pack fits snugly into the handle to

prevent accidental dislodging. It may require a strong
pull to remove.

To Install

1. Align the tongue 

(3)

of the battery pack with the cavity in

the handle housing.

2. Grasp the trigger handle 

(2)

firmly.

3. Push the battery pack into the handle until both sides

lock. The latch buttons will click when they lock.

4. Do not use force when inserting the battery pack.

It should slide into place and click.

8

WARNING

Guard

1

2

3

Fig.1

(Fig. 2)

ASSEMBLY INSTRUCTIONS

2        

1        

To avoid injury, always remove the battery pack 

before installing the guard, changing a cutting line, or 
making any adjustments. If the guard is damaged, do not 
use the grass trimmer until it is replaced. NOTE: Install the 
protective guard before operating thegrass trimmer. It can not 
be removed or disassembled.
1. Remove the battery pack.
2. Invert the grass trimmer to access the trimmer head.
3. Using a phillips head screwdriver, remove the 
    pre-installed screw (1) from the trimmer head.
4. Place the guard (2) on to the trimmer head and turn the
    guard 45° following the track on the head.
5. Align the screw hole on the guard with the screw hole on
    the trimmer head. 
6. Insert the screw to the trimmer head fastening the guard
    in place.

(1)DOWN

Battery pack (Fig. 1)

IMPORTANT! The battery pack is not charged when it is purchased. Before using the trimmer for the 
first time, place the battery pack in the battery charger and charge for a full 24 hours. Make sure you 
read all safety precautions, and follow the instructions in the Battery Charger section of the manual. 
With regular use it will need shorter charging times. After prolonged storage time,charge the battery 
pack for at least 24 hours again. Nickel-cadmium batteries can develop a memory for usage and 
storage times.

To avoid injury and to reduce the risk of electrical shock or fire:
• Replace the battery pack or charger immediately if the battery case or charger cord is damaged.
• Always make sure the grass trimmer switch is OFF before inserting or removing the battery pack.
• Always make sure the battery pack is removed and the switch turned OFF, before replacing spools or 
adjusting the line.
• Read, understand, and follow the Battery Charger instructions.

Summary of Contents for 21023

















Reviews: