Task Force Tips VORTEX Manual Download Page 1

Page: 1 / 12

©Copyright Task Force Tips LLC 2016-2019

LIS-040 April 8, 2019 Rev02

VORTEX

NOZZLE MANUAL

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE

WARNING

Understand manual before use. Operation of this device without understanding the manual

and receiving proper training is a misuse of this equipment. Obtain safety information at

tft.com/serial-number

This instruction manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing and

safety procedures associated with the VORTEX fire fighting nozzles.

This manual should be kept available to all operating and maintenance personnel.

TASK FORCE TIPS LLC

MADE IN USA • tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

DANGER

PERSONAL RESPONSIBILITY CODE

The member companies of FEMSA that provide emergency response

equipment and services want responders to know and understand the

following:

Firefighting and Emergency Response are inherently dangerous activities

requiring proper training in their hazards and the use of extreme caution

at all times.

2. It is your responsibility to read and understand any user’s instructions,

including purpose and limitations, provided with any piece of equipment

you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in

Firefighting and /or Emergency Response and in the use, precautions, and

care of any equipment you may be called upon to use.

4. It is your responsibility to be in proper physical condition and to maintain

the personal skill level required to operate any equipment you may be

called upon to use.

5. It is your responsibility to know that your equipment is in operable

condition and has been maintained in accordance with the manufacturer’s

instructions.

6. Failure to follow these guidelines may result in death, burns or other

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfield, MA 01940 • www.FEMSA.org

VORTEX

ORTEX

RTEX

Summary of Contents for VORTEX













Search results

Summary of Contents for VORTEX

Reviews:

Related manuals for VORTEX

Brands by name

Popular brands

Task Force Tips VORTEX, Manual

Search results

Summary of Contents for VORTEX

Reviews:

Related manuals for VORTEX

Brands by name

Popular brands