©Copyright Task Force Tips LLC 2018 - 2020
LIS-045 May 5, 2019 Rev02
TASK FORCE TIPS LLC
MADE IN USA • tft.com
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
12.0 OPERATION AND INSPECTION CHECKLIST
BEFORE EACH USE,
equipment must be inspected to this checklist:
1. There is no obvious damage such as missing, broken or loose parts, damaged labels, etc.
2. Internal vanes are free of debris
3. Coupling is tight and leak free
4. Nozzle
fl
ow is adequate as indicated by pump pressure and nozzle reaction
5. Nozzle turns freely and adjusts pattern through full range with electric and manual control
BEFORE BEING PLACED BACK IN SERVICE
, equipment must be inspected to this list:
1. All controls and adjustments are operational.
2. There are no broken or missing parts.
3. There is no damage that could impair safe operation (e.g. detents, cracks, corrosion, or other defects).
4. The gasket is in good condition
5. The waterway is clear of obstructions
6. The equipment is clean and markings are legible
7. Coupling is retightened properly
8. Nozzle is set to the desired pattern
WARNING
Equipment failing any part of the checklist is unsafe for use and must have the problem corrected
before use or being placed back into service. Operating equipment that has failed the checklist
is a misuse of this equipment.
