background image

©Copyright Task Force Tips LLC   2018 - 2019 

LIS-045 April 22, 2019 Rev01

2

DANGER

PERSONAL RESPONSIBILITY CODE

The  member  companies  of  FEMSA  that  provide  emergency  response 
equipment  and  services  want  responders  to  know  and  understand  the 
following:

1. Firefi ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It  is  your  responsibility  to  read  and  understand  any  user’s  instructions, 

including  purpose  and  limitations,  provided  with  any  piece  of  equipment 
you may be called upon to use.

3. It  is  your  responsibility  to  know  that  you  have  been  properly  trained  in 

Firefi ghting and /or Emergency Response and in the use, precautions, and 
care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the  personal  skill  level  required  to  operate  any  equipment  you  may  be 
called upon to use.

5. It  is  your  responsibility  to  know  that  your  equipment  is  in  operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure  to  follow  these  guidelines  may  result  in  death,  burns  or  other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfi eld, MA  01940 • www.FEMSA.org

Summary of Contents for VORTEX 2 ER

















Reviews: