©Copyright Task Force Tips LLC 2011-2019
LIG-012 March 28, 2019 Rev06
4
3.0 GENERAL INFORMATION
The Task Force Tips G-Force nozzles are designed to provide excellent performance under most fi re fi ghting conditions. Their
rugged construction is compatible with the use of fresh water (see section 3.4 for saltwater use) as well as fi re fi ghting foam
solutions.
Two body sizes are available - a 1.5” / 38 mm size with fl ow rates up to 150 gpm / 570 l/min and a compact 1.0” / 25 mm size with
fl ow rates up to 100 gpm / 400 l/min.
3.1 VARIOUS MODELS AND TERMS
The G-Force nozzle is available in several diff erent models and inlet connections. Basic body styles are shown in fi gure 3.1
ON
OFF
DETENTS
TACTILE INDICATOR
OR SHAPER LOCK
SELECTOR
RING
STREAM SHAPER
NOZZLE WITH VALVE
NOZZLE WITH VALVE
& INTEGRAL PISTOL GRIP
STREAM SHAPER
TACTILE INDICATOR
OR SHAPER LOCK
ON
OFF
SELECTOR
RING
PISTOL GRIP
DETENTS
VARIOUS
COUPLINGS
AVAILABLE
VARIOUS
COUPLINGS
AVAILABLE
FLOW CONTROL
OFF
ON
4 POSITION
LOCK
NOZZLE WITH IMPULSE
TRIGGER VALVE SYSTEM
TACTILE INDICATOR
OR SHAPER LOCK
STREAM SHAPER
Figure 3.1
Basic Body Styles
Other options are:
• Fixed rubber, fi xed aluminum or stainless steel spinning fog teeth.
• Shaper tactile indicator with or without detent (see section 5.2.2)
• Shaper lock out lever (see section 5.2.3)
Four fl ow options are available. All four use the selector ring for fl ush control. The fl ow options are:
• Fixed fl ow (see section 4.1)
• Selectable fl ow (see section 4.2)
• Automatic (see section 4.3)
• Automatic with Flow Limiting (see section 4.4)
3.2 SPECIFICATIONS
3.2.1 MECHANICAL
1.5” / 38mm
ALL
1.0” / 25mm
BAIL HANDLE
1.0” / 25mm
IMPULSE TRIGGER
Maximum operating pressure (with valve shut off )
370 psi / 25.5 bar
370 psi / 25.5 bar
580 psi / 40.0 bar
Operating temperature range of fl uid
33 to 120º F / 1 to 50º C
Storage temperature range
-40 to 150º F / -40 to 65º C
Materials used
Aluminum 6000 series hard anodized MIL8625 class 3 type
2, stainless steel 300 series, nylon 6-6, nitrile rubber
