Real People - Real Solutions Real People - Real Solutions Real People - Real Solutions Real People - Real Solutions
2
Description:
Many consumer products have hand-held remote controls that use a coded infrared
transmission to operate the main unit (TV’s, DVD’s, etc.). Remote controlled devices
are in many cases, more convenient to use by people who have physical disabilities;
however, the small transmitter unit is often unsuitable for them to use.
The RELAX 3 is a trainable, infrared scanning device which is operated by any
TASH single switch.
“Trainable”: The RELAX 3 can learn the codes from your own hand held remote
control. It is capable of learning and transmitting 30 different control
codes for TV’s, Converters, VCR’s and almost any other equipment
operated by infrared transmissions.
“Infrared”:
The RELAX 3, once trained, acts as an infrared transmitter.
“Scanner”:
Each infrared transmission code is saved at a particular location on
the RELAX 3, marked by a label and a red light emitting diode (LED).
Once the switch is activated, the RELAX 3 scans through your options
at an adjustable speed.
Operating Modes:
The RELAX 3 has two operating modes: one is TRAIN, in which it learns the required
codes and the other is USE, where it transmits the learned codes.
Single Switch Control:
A single switch is needed to operate the RELAX 3 and is plugged into the jack marked
S1 or S2 at the side of the display. Either S1 or S2 may be used. A built-in Attendant
Switch is located next to the jack for the convenience of an assistant.
Top Group of Green LED’s:
PHONE
TV
VCR
AUX
X-10
Switch activation at any one of these LED’s results in scanning of the bottom group
of LED’s. The Phone and X-10 locations can not be changed. Although the LED’s are
identified as TV, VCR, AUX, the RELAX 3 is not restricted to these devices and can be
used with most any equipment for which you possess a remote control infrared transmitter.
