Step 1:
Recording
The AXON body camera has two operating modes: BUFFERING and EVENT. The default mode,
or BUFFERING mode, provides pre-event buffering to capture activities that occur prior to the
user activating the EVENT mode.
When you activate the EVENT mode, the buffered video (not audio) captured directly before
the event will be saved and attached to the event in permanent memory. This feature is
intended to capture the video of an incident just before your activation of EVENT mode.
1
Move the ON/OFF switch to the ON position. The camera takes 5 seconds to boot up
and be ready to record (the red area under the switch will be exposed with the camera
turned ON).
•
The Operation LED will be solid red and then transition to blinking green when it is
in BUFFERING mode.
•
The camera will be capturing video but no audio, and will not record to permanent
memory while in BUFFERING mode.
•
Buffered video duration is up to 30 seconds (00:00:30).
CAUTION
Because the system does not capture audio in BUFFERING mode, the first 30 seconds of
a recorded event will be video-only (depending on your agency’s settings). BUFFERING
mode starts only after the camera is turned on. The system does not record when the
camera is turned off.
