Step 7:
Upload Status LED
When you plug your AXON body into the ETM, the upload status LED on the camera displays
the system’s status:
System Status
Camera Bottom LED Indication
Uploading Data
Blinking Yellow
DO NOT Remove from the ETM
Device Ready (All Videos Uploaded
Successfully)
Solid Green
In Queue Awaiting Upload
Solid Yellow
Initial Connection
Solid Red (Momentary)
Device Not Assigned, Agency Mismatch,
or Camera Set in the Offline Mode
Blinking Red
Consult ETM Support Page
ETM Has No Communication with
Camera
LED Off
Firmware Update, Internal Battery
Charging, or Memory Full
Blinking Red and Yellow
DO NOT Remove from the ETM
Network Error
Blinking Red, Yellow, and then Green
