Tascam X-9, Owner'S Manual

Page: 9 / 36

2 Getting acquainted with the X-9
TASCAM X-9 Owner’s Manual
9
Cross-fader and fader controls
These take care of the A and B outputs which are
assigned to the cross-fader using the
ASSIGN
con-
trols, and then passed to the master stereo output.
It is possible to set the cross-fader curve, reversal,
and allow source starting with the cross-fader.
See
“Cross-fading” on page 14 for details of how
the cross-fader fits into the signal chain.
See
“Faders” on page 21 for details of cross-fader
settings.
Effect, menu, etc. management
This section handles the effects, the parameter menus
and the equalization memories of the X-9.
See
“EQ” on page 28, “Effects” on page 23 and
“Menu reference” on page 17 for details.