background image

 

TASCAM TA-1VP

  

3

 

1  Read these instructions.

  2  Keep these instructions.

  3  Heed all warnings.

  4  Follow all instructions.

  5  Do not use this apparatus near water.

  6  Clean only with dry cloth.

  7  Do not block any ventilation openings. Install in 

accordance with the manufacturer's instructions.

  8  Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

  9  Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding 

type  plug  has  two  blades  and  a  third  grounding 

prong. The  wide  blade  or  the  third  prong  are 

provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

 10  Protect  the  power  cord  from  being  walked  on 

or  pinched  particularly  at  plugs,  convenience 

receptacles, and the point where they exit from the 

apparatus.

 11  Only use attachments/accessories specified by the 

manufacturer.

 12  Use  only  with  the  cart,  stand,  tripod,  bracket,  or 

table specified by the manufacturer, or sold with the 

apparatus. When a cart is used, use caution when 

moving the cart/apparatus combination to avoid 

injury from tip-over.

 13  Unplug this apparatus during lightning storms or 

when unused for long periods of time.

 14  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has 

been exposed to rain or moisture, does not operate 

normally, or has been dropped.

Do not expose this apparatus to drips or splashes.

• 

Do not place any objects filled with liquids, such as 

• 

vases, on the apparatus.
Do not install this apparatus in a confined space such 

• 

as a book case or similar unit.
The apparatus draws nominal non-operating power 

• 

from the AC outlet with its POWER or STANDBY/ON 

switch not in the ON position.
The apparatus should be located close enough to the 

• 

AC outlet so that you can easily grasp the power cord 

plug at any time.
The mains plug is used as the disconnect device, the 

• 

disconnect device shall remain readily operable.
Caution should be taken when using earphones or 

• 

headphones  with  the  product  because  excessive 

sound pressure (volume) from earphones or head-

phones can cause hearing loss.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for TASCAM TA-1VP













































Reviews: