Tascam MX-2424, Operational Tutorial

Page: 37 / 52

- 37 -
Loading a Track
1) Press [ PROJ/NEW ]. (The display should look like this.)
Load
*Select Action
2) Press [ STORE/YES ]. You should see the names of the projects currently on your
hard drive. For example:
Load Project
Warmness.t1 [0:212]
3) Scroll to the project that contains the Virtual Tracks you want to load. (Don't press
"Yes" yet or you will load a project!)
4) Press [ PROJ/NEW ] again. You will see the name of all tracks associated with the
project listed in the previous window – unloaded or loaded. Such as,
Load into Track 23:
Bass_1_58
5) Use the [ Up/Down ] buttons to scroll to the Virtual Track you want to load.
6) Use the Track Select buttons to choose the track position (1-24) where you want to
load the Virtual Track.
7) Press [ STORE/YES ]. If the Virtual Track originated in the current project, that's it, the
track is loaded. If the Virtual Track comes from a different project, you are prompted,
"Import to Curr Proj?" Press [
STORE/YES ] to do it, or [ RCL/NO ] to cancel.
8) To exit, press [ CLEAR/CANCEL ].
9) To check that you successfully loaded the track, press [ VIEW/UNLOAD ] and select
the Track that was loaded. You should see something like,
Track Contents:
23 Bass_1_58_129