Tascam MD-02, Owner'S Manual

Page: 34 / 40

34
TASCAM MD-02/MD-02B
11 − Messages & Troubleshooting
Operation messages
Depending on the operation of the unit, the following messages might be shown in the main display area.
Messages Meaning/response
Blank Disc A recordable MD that has nothing recorded is loaded.
UnknownDisc! There is a problem with the disc. Try a different disc.
Complete Editing has been finished correctly.
TOC Reading TOC information is being read.
UTOC Writing TOC information is being written.
Now Editing Editing is being executed.
Warning messages
The following types of messages might appear in the main display area when an operation cannot be completed.
Error messages Meaning/response
Disc Error! There is a problem with the disc. Replace it.
Disc Full! The MD has no more remaining time, so recording is not possible.
Title Full! The title is at the maximum length.
D–IN UNLOCK! There is nothing connected to a DIGITAL IN input or the device connected has not been turned on.
Not Execute! Due to MD system limitations, editing could not be completed.
Not Audio! The signal input through the DIGITAL IN is not an audio signal.
PGM Empty! No tracks have been added to the program.
PGM Full! No more tracks can be added to the program.
W_Protected! The MD is write-protected.
Pre Master! An MD that can only be played is loaded.
Can't Edit! Due to MD system limitations and editing conditions, editing could not be completed.
Group Mode! Since group mode is ON, editing is not possible.
NotContinue! Since playback mode is not “Continue,” editing is not possible.
Not Stopped! Since the unit is not stopped, editing is not possible.
Sync Rec ON! You cannot start recording manually because the unit is in sync recording standby.
Rec Execute! Since the unit is recording, recording mode cannot be changed.
Can't Sel! Since selection is currently prohibited, a menu item cannot be selected.
Mecha Error! An error occurred in disc reading, recording or playback. Try again.
No Group! No group has been created.
Entry Track! The track you are trying to add has already been added to a group.
Random Mode! Since the playback is set to random mode, group mode cannot be turned ON.
1st Track! When the first track is selected, combine cannot be performed. Select the second or later track.
IR Disable! Remote control operation has been disabled.