TASCAM iXR
9
3 – Installation
In this case, copy the file from the folder where it is to the
desktop or another folder, and then open it. Alternatively,
change the Gatekeeper settings to “Allow applications
downloaded from: the Mac App Store and identified devel-
opers” and try opening it again.
8
When the Gatekeeper setting is not “Allow
applications downloaded from: the Mac App Store”
“'iXR_Installer.dmg' is an application downloaded from the
Internet. Are you sure you want to open it?” might appear
as a security warning message. In this case, click the “Open”
button.
8
Changing the Gatekeeper setting
The Gatekeeper setting can be changed using the “Allow
applications downloaded from:” item on the “General” page
of the “Security & Privacy” pane of the System Preferences.
To change this, you must click the lock icon ( ) at the
bottom left and enter a password to unlock the settings.
This setting will lock again when you click the “Show All”
button to close the open pane or when you quit the System
Preferences by, for example, clicking the button or typing
command-Q.
CAUTION
Changing the Gatekeeper setting could result in security
risks.
If you changed the Gatekeeper setting to decrease security
(use one of the lower settings), set it back to the original
setting after updating the software and/or firmware. (When
installing a firmware update immediately after software, do
this after installing the firmware update.)
Uninstalling the dedicated software
NOTE
Normally, there is no need to uninstall the dedicated
software. Follow these procedures if a problem occurs or
you no longer intend to use the unit with the computer.
Uninstalling the iOS Settings Panel
Tap and hold the “
TASCAM Settings Panel for Audio Interface
” icon
to show the × mark and enable app deletion. Tap the × mark to
delete the app.
Uninstalling the Windows driver
Uninstalling from the Programs and Features Control Panel.
1. From the Start menu, open the Control Panel and launch
Programs and Features.
NOTE
•
In Windows 10, right-click the Start button and click Control
Panel when it appears.
•
In Windows 8.1, right-click the button at the bottom left of
the Start screen and click Control Panel on the Apps screen.
2. If “View by:” is set to “Category”, click “Uninstall a program”
under the “Program” item.
If “View by:” is set to “Large icons” or “Small icons”, click
“Programs and Features”.
3. Double-click “TASCAM iXR” in the list.
4. Then, follow the instructions that appear on the screen.
Uninstalling the Mac Settings Panel
Delete “iXR_Settings Panel” from the Application folder to
complete uninstallation.
