Tascam dr-44wl, Reference Manual

Page: 21 / 62

TASCAM DR-44WL
21
4 – Recording
Setting channel links (4 CH mode only)
Channels 1 and 2, as well as channels 3 and 4, can be linked.
When channels (tracks) are linked, their settings on the
INPUT SETTING
screen are shared.
1. Press the INPUT button to show the
INPUT SETTING
screen.
2. Press a TRACK/INPUT button to open the
INPUT
SETTING
screen for the linked channels (tracks).
3. Using the wheel select (highlight)
LINK
and press the
ENTER/MARK or
/
button.
4. Use the wheel to set the channel (track) link.
Options:
OFF
(default value),
ON
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the
8
/HOME
button to return to the Home screen.
NOTE
LINK
can be set or changed even during recording
standby and when recording.
Set the track input (MTR mode only)
1. Press the MENU button to open the
MENU
screen.
2. Using the wheel, select (highlight)
MODE
and press the
ENTER/MARK or
/
button.
The
MODE
screen is displayed.
3. Press the ENTER/MARK or
/
button.
4. Using the wheel, set the mode to MTR mode and press the
ENTER/MARK button.
Options:
4CH
(4 CH mode, default value),
MTR
(MTR
mode)
5. Press the INPUT button to show the
INPUT SETTING
screen.
6. Press a TRACK/INPUT button to open the
INPUT
SETTING
screen for that track to set its input.
7. Using the wheel, select (highlight)
INPUT
and press the
ENTER/MARK or
/
button.
INPUT SETTING
screen Tr1 display when in MTR mode
Option Input destination
OFF No input setting
INT L
(Track 1 default)
Input from right front side of built-in
stereo mic
INT R
Input from left back side of built-in
stereo mic
EXT 1 Input from EXT MIC/LINE IN 1/L jack
EXT 2 Input from EXT MIC/LINE IN 2/R jack
Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
8. Once the setting has been completed, press the
8
/HOME
button to return to the Home screen.
NOTE
•
The
INPUT
setting cannot be used when recording.
•
The same input option cannot be shared by multiple
tracks. If an input option that has already been assigned is
selected, the track that was originally assigned will be set to
OFF
.