Tascam DR-40 Owner'S Manual Download

Page: 39 / 120

TASCAM DR-40

Removing the card

1 Open the SD slot cover on the right side panel.
2 Press the SD card in gently and then release it to allow

it to come out.

CAUTION

Do not remove the SD card from the unit when it is

•

connected to a computer by USB.
SD cards that meet SD or SDHC standards can be used with

•

this unit.
A list of SD cards that have been confirmed to work with

•

this unit can be found on our website (http://tascam.com/).

Card write protection

SD cards have protect switches that prevent writing new data
to them.

Unprotected Protected

If you slide the protect switch to the “LOCK” position, file
recording and editing is not possible. Move the switch to the
unlocked position in order to record, erase and otherwise edit
data on the card.

3 – Preparation

Summary of Contents for DR-40

























































































































Search results

Summary of Contents for DR-40

Reviews:

Related manuals for DR-40

Brands by name

Popular brands

Tascam DR-40, Owner'S Manual

Search results

Summary of Contents for DR-40

Reviews:

Related manuals for DR-40

Brands by name

Popular brands