New features in DM-24 version 2.1
TASCAM DM-24
Version 2.1 Release Notes
3
Busses as effect input sources
Busses 1-8 can now be used as input sources for the
internal effects on the
PATCH
page. This can be conve-
nient if all aux sends are already being used for other
purposes.
New features in HUI
The HUI page has changed considerably and new
functions have been added.
As only channel strips 1-8 are functional in HUI
mode, the keys on channel strips 9-16 have been
mapped to perform specific functions.
• Pressing the
SHIFT
soft key icon allows you to use
the faders as aux send level controls for the chosen
send. Pressing this soft key again returns the faders
to fader control of the DAW.
•
MUTE
keys 11-12 act as left bank and right bank
keys. These banks operate in 8-channel incre-
ments.
•
SEL
keys 11-12 act as left and right channel
advance keys. This is similar to the bank keys, but
these keys only “move” by one channel at a time.
•
REC
key 11 recalls the EDIT screen in Pro Tools,
while
REC
key 12 recalls the MIX screen in Pro
Tools.
•
SEL
14 and
SEL
16 make the waveform shorter
and longer (time axis) respectively.
• Pressing the
SEL
15 key activates ZOOM.
REC
15
key and
MUTE
15 key make the waveform larger
and smaller respectively.
•
MUTE
key 10 selects the POD controls as pan con-
trols.
•
REC
key 9 selects SEND A,
REC
key 10 selects
SEND B,
SEL
key 9 selects SEND C,
SEL
key 10
selects SEND D, and
MUTE
9 selects SEND E.
All of these functions are laid out clearly on the HUI
page as shown here.
Bug fixes
In addition to the features listed above, the DM-24
version 2.1 firmware release addresses all known
bugs.
